First wrist-worn wearable OLCD for display and sensor applications
FlexEnable, the leader in the development and industrialisation of flexible organic electronics, is showcasing a full colour, conformable organic LCD (OLCD) at Mobile World Congress 2016.
Curved into a smartwatch form factor, the 0.3mm thick display component demonstrates how mainstream wearables can be brought to life with displays and sensors using flexible electronics.
FlexEnable’s OLCD featured in this smartwatch prototype shows the unique benefits that flexible technology brings to wearables: the use of flexible displays means that wearable products are no longer constrained by rigid design dimensions, but can conform to the wearer and not the other way around. Being extremely light and thin, flexible displays save space that can be used to improve product form factors and include additional components or battery capacity.
In addition to standard smartwatch interface, the OLCD can also run vivid colour and smooth video content – a feature that brings vastly more utility because of the large area. This product concept demonstrates that body conformal displays offer the potential to significantly increase the viewing area of wearable devices without compromising user comfort and aesthetics.
The 4.7″ OLCD is driven by FlexEnable’s groundbreaking flexible transistor technology, which has been used to develop glass-free, flexible and unbreakable displays, and is particularly applicable in the mobile, wearable and automotive industries. Chuck Milligan, CEO of FlexEnable, said: “The market for wearable devices, and the applications enabled by these devices, is growing fast. However, form-factor constraints and rigidness of components, particularly the display, present challenges for wearables that limit design options and utility. Flexible displays are driving a paradigm shift enabling greater levels of innovation in wearable applications.
The ability to bend and form ultra-thin, unbreakable displays and sensors to any and every surface gives our partners the freedom to design game-changing products which have been impossible until today.”
FlexEnable will be showcasing the OLCD smartwatch prototype at IDTechEx’s Printed Electronics Europe 27-28 April, 2016 in Berlin, Germany at Booth C12.
Read more at: http://www.printedelectronicsworld.com/articles/9122/first-wrist-worn-conformable-olcd-for-wearable-applications
Graphene leans on glass to advance electronics.
Graphene, the two-dimensional powerhouse, packs extreme durability, electrical conductivity, and transparency into a one-atom-thick sheet of carbon.
Despite being heralded as a breakthrough “wonder material,” graphene has been slow to leap into commercial and industrial products and processes.
Now, scientists have developed a simple and powerful method for creating resilient, customized, and high-performing graphene: layering it on top of common glass. This scalable and inexpensive process helps pave the way for a new class of microelectronic and optoelectronic devices—everything from efficient solar cells to touch screens.
The collaboration—led by scientists at the U.S. Department of Energy’s (DOE) Brookhaven National Laboratory, Stony Brook University (SBU), and the Colleges of Nanoscale Science and Engineering at SUNY Polytechnic Institute—published their results in the journal Scientific Reports.
“We believe that this work could significantly advance the development of truly scalable graphene technologies,” said study coauthor Matthew Eisaman, a physicist at Brookhaven Lab and professor at SBU. The scientists built the proof-of-concept graphene devices on substrates made of soda-lime glass—the most common glass found in windows, bottles, and many other products. In an unexpected twist, the sodium atoms in the glass had a powerful effect on the electronic properties of the graphene.
“The sodium inside the soda-lime glass creates high electron density in the graphene, which is essential to many processes and has been challenging to achieve,” said co-author Nanditha Dissanayake of Voxtel, Inc., but formerly of Brookhaven Lab. “We actually discovered this efficient and robust solution during the pursuit of something a bit more complex. Such surprises are part of the beauty of science.”
Crucially, the effect remained strong even when the devices were exposed to air for several weeks—a clear improvement over competing techniques. The experimental work was done primarily at Brookhaven’s Sustainable Energy Technologies Department and the Center for Functional Nanomaterials (CFN), which is a DOE Office of Science User Facility.
The graphene tweaks in question revolve around a process called doping, where the electronic properties are optimized for use in devices. This adjustment involves increasing either the number of electrons or the electron-free “holes” in a material to strike the perfect balance for different applications. For successful real-world devices, it is also very important that the local number of electrons transferred to the graphene does not degrade over time.
“The graphene doping process typically involves the introduction of external chemicals, which not only increases complexity, but it can also make the material more vulnerable to degradation,” Eisaman said.
“Fortunately, we found a shortcut that overcame those obstacles.” The team initially set out to optimize a solar cell containing graphene stacked on a high-performance copper indium gallium diselenide (CIGS) semiconductor, which in turn was stacked on an industrial soda-lime glass substrate. The scientists then conducted preliminary tests of the novel system to provide a baseline for testing the effects of subsequent doping. But these tests exposed something strange: the graphene was already optimally doped without the introduction of any additional chemicals.
“To our surprise, the graphene and CIGS layers already formed a good solar cell junction!” Dissanayake said. “After much investigation, and the later isolation of graphene on the glass, we discovered that the sodium in the substrate automatically created high electron density within our multi-layered graphene.”
Pinpointing the mechanism by which sodium acts as a dopant involved a painstaking exploration of the system and its performance under different conditions, including making devices and measuring the doping strength on a wide range of substrates, both with and without sodium.
“Developing and characterizing the devices required complex nanofabrication, delicate transfer of the atomically thin graphene onto rough substrates, detailed structural and electro-optical characterization, and also the ability to grow the CIGS semiconductor,” Dissanayake said. “Fortunately, we had both the expertise and state-of-the-art instrumentation on hand to meet all those challenges, as well as generous funding.”
The bulk of the experimental work was conducted at Brookhaven Lab using techniques developed in-house, including advanced lithography. For the high-resolution electron microscopy measurements, CFN staff scientists and study coauthors Kim Kisslinger and Lihua Zhang lent their expertise. Coauthors Harry Efstathiadis and Daniel Dwyer—both at the College of Nanoscale Science and Engineering at SUNY Polytechnic Institute—led the effort to grow and characterize the high-quality CIGS films. “Now that we have demonstrated the basic concept, we want to focus next on demonstrating fine control over the doping strength and spatial patterning,” Eisaman said.
The scientists now need to probe more deeply into the fundamentals of the doping mechanism and more carefully study material’s resilience during exposure to real-world operating conditions. The initial results, however, suggest that the glass-graphene method is much more resistant to degradation than many other doping techniques. “The potential applications for graphene touch many parts of everyone’s daily life, from consumer electronics to energy technologies,” Eisaman said. “It’s too early to tell exactly what impact our results will have, but this is an important step toward possibly making some of these applications truly affordable and scalable.”
For example, graphene’s high conductivity and transparency make it a very promising candidate as a transparent, conductive electrode to replace the relatively brittle and expensive indium tin oxide (ITO) in applications such as solar cells, organic light emitting diodes (OLEDs), flat panel displays, and touch screens.
In order to replace ITO, scalable and low-cost methods must be developed to control graphene’s resistance to the flow of electrical current by controlling the doping strength. This new glass-graphene system could rise to that challenge, the researchers say.
Read more at: http://www.printedelectronicsworld.com/articles/9105/graphene-leans-on-glass-to-advance-electronics
EIPC membership has many advantages, both financially and in services. Such as:
EIPC membership has many advantages, both financially and in services. Such as:
Thank you.
Your request has been sent to the site administrator.
The payment procedure will be handled via email correspondence.
EIPC will send an invoice to you through email and discuss your yearly fees.